top of page

Grupo Agência Alcântara

Público·39 membros

Test Drive Unlimited 2 Unlock Code Ve Serial 19

After the evaluation period has expired, you will be prompted to enter a license key. If you have purchased the product you will have received a new license key. Enter the purchased license key when prompted to unlock the full "unlimited" version of the software. To take advantage of complimentary email support for up to 30 days, your license key must be registered. If you purchased the product from the VMware Online store, your license key is automatically registered. If you purchased from a reseller, you need to manually register your license key in My VMware. Please consult this KB article for detailed instructions on license key registration.

test drive unlimited 2 unlock code ve serial 19


There is no upgrade to increase the cores on this feature. Thisserver supports AIX, IBM i, and Linux, but is especially attractive toIBM i clients with its P05 software tier. The Capacity Backup optionfor IBM i (#0444) is supported. The 4-core S914 server supports the16 GB memory feature (#EM62). A maximum of four of these features issupported for a system maximum of 64 GB. The 4-core S914 serversupports a maximum of 10 disk drives or 10 SSDs or a combination of 10disks and SSDs in the system unit. Alternatively, in the system unit,a maximum of 3 NVMe PCIe Adapters (and no SAS drives). This is truewith any of the storage backplane options selected. SAS driveslocated in feature code I/O drawers such as the EXP24SX (#ESLS) arenot supported. Attachment to SANs is supported. The following SFF-3SAS drives are supported in the SAS bays of the 4-core S914 systemunit:

If you are attaching an HMC to a new server or adding function toan existing server that requires a firmware update, the HMC machinecode may need to be updated because HMC code must always be equal toor higher than the managed server's firmware. Access to firmware andmachine code updates is conditioned on entitlement and licensevalidation in accordance with IBM policy and practice. IBM may verifyentitlement through customer number, serial number, electronicrestrictions, or any other means or methods employed by IBM at itsdiscretion.

If a single HMC is attached to multiple servers, the HMC machinecode level must be updated to be at or higher than the server with themost recent firmware level. All prior levels of server firmware aresupported with the latest HMC machine code level.

#0347 is a specify code that indicates to IBM configuration toolsand to IBM Manufacturing that RAID-5 or RAID-6 disk arrays should befurther protected using the IBM i function of RAID hot spare. Ifspecified, IBM will ship a configuration which has at least one stand-by disk drive for each disk controller in the system or designatedpartition. The customer may alter the hot spare configurationselecting different options once the system is installed.

Features #1962 and #1964 are physically identical drives with thesame 19B3 CCIN. Different feature codes help the IBM configurationtools understand how the HDD is used. #1964 indicates usage by AIX,Linux or VIOS. #1962 indicates usage by IBM i.

Multiple cable length feature codes are available. Choose thecable length that best matches the distance between the two adapters.Note: AOC cables require minimum level of SAS Adapter firmware. Referto the latest prerequisites at

#EJ0J and #EJ10 are the same adapter with the same 57B4 CCIN, buthave different feature code numbers to indicate different usage to IBMconfigurator tools. #EJ10 runs SAS LTO-5 or later tape drives andDVD. Support of both tape/DVD and HDD/SSD on the same adapter is notsupported.Note: The original #EJ0X adapter does not support DVD but also has thesame CCIN.Note: Adapter uses a Mini-SAS HD narrow connector and AE1 #ECBZ or YE1#ECBY SAS cable.

This is a PCIe Gen1 short x8 form factor adapter. It supports theattachment of SAS tape and DVD using a pair of mini SAS 4x connectors.The PCIe1 can be used for external tape drives which are not supportedon the newer and faster 4-port 6Gb PCIe3 adapter (see feature code#EJ10/EJ11/EL60). The adapter supports external SAS tape drives suchas the DAT72, DAT160, LTO-4, LTO-5, LTO-6, and LTO-7 found in the IBMmultimedia drawers such as the 7226-1U3 or 7214-1U2 or tape units suchas the TS2240, TS2340, TS3100, TS3200, and TS3310. Other removablemedia devices supported include IBM SAS/ SATA DVD-ROM/RAM drives.

SAS adapter-to-enclosure (AE) 3Gb cables with mini-SAS connectorsare used to attach these drives. See feature codes #3684 (3 meter)and #3685 (6 meter). The same AE cables can often alternatively beordered under the tape enclosure or multimedia drawer.

There are three options for using the IMb: non-automation, basic automation, and Full-Service. In each of these cases, you'll want to ensure that you've tested your barcodes for compatability and accuracy or work with certified vendors.

Making a comparison between SSDs and ordinary (spinning) HDDs is difficult. Traditional HDD benchmarks tend to focus on the performance characteristics that are poor with HDDs, such as rotational latency and seek time. As SSDs do not need to spin or seek to locate data, they may prove vastly superior to HDDs in such tests. However, SSDs have challenges with mixed reads and writes, and their performance may degrade over time. SSD testing must start from the (in use) full drive, as the new and empty (fresh, out-of-the-box) drive may have much better write performance than it would show after only weeks of use.[147]

On January 14, 2008, EMC Corporation (EMC) became the first enterprise storage vendor to ship flash-based SSDs into its product portfolio when it announced it had selected STEC, Inc.'s Zeus-IOPS SSDs for its Symmetrix DMX systems.[276] In 2008, Sun released the Sun Storage 7000 Unified Storage Systems (codenamed Amber Road), which use both solid state drives and conventional hard drives to take advantage of the speed offered by SSDs and the economy and capacity offered by conventional HDDs.[277]

SSD technology has been developing rapidly. Most of the performance measurements used on disk drives with rotating media are also used on SSDs. Performance of flash-based SSDs is difficult to benchmark because of the wide range of possible conditions. In a test performed in 2010 by Xssist, using IOmeter, 4 kB random 70% read/30% write, queue depth 4, the IOPS delivered by the Intel X25-E 64 GB G1 started around 10,000 IOPs, and dropped sharply after 8 minutes to 4,000 IOPS, and continued to decrease gradually for the next 42 minutes. IOPS vary between 3,000 and 4,000 from around 50 minutes onwards for the rest of the 8+ hour test run.[292]

Sampling is intended to provide certification that a group of new homes meets a particular threshold such as ENERGY STAR, energy code compliance, or qualification for an energy efficiency lending program. It is based on pre-analysis of building plans meeting the intended qualification (e.g., a HERS Index threshold), and subsequent random testing and inspections of a sample set of the as-built homes. Certifying a group of homes by sampling entitles the customer to documentation certifying that the homes meet the desired threshold; it does not constitute a confirmed HERS rating on any home. A worst-case REM/Rate file must be submitted for all sampled residential units. 350c69d7ab


Bem-vindo ao grupo! Você pode se conectar com outros membros...


bottom of page